Hamlib  4.1
/tests/testrig.c
/*
* Hamlib sample program
*/
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <stdlib.h>
#include <hamlib/rig.h>
#include "misc.h"
#ifdef HAVE_CONFIG_H
# include "config.h"
#endif
#define SERIAL_PORT "/dev/ttyUSB0"
int main(int argc, char *argv[])
{
RIG *my_rig; /* handle to rig (nstance) */
freq_t freq; /* frequency */
rmode_t rmode; /* radio mode of operation */
pbwidth_t width;
vfo_t vfo; /* vfo selection */
int strength; /* S-Meter level */
int rit = 0; /* RIT status */
int xit = 0; /* XIT status */
int retcode; /* generic return code from functions */
rig_model_t myrig_model;
printf("testrig: Hello, I am your main() !\n");
/* Turn off backend debugging output */
rig_set_debug_level(RIG_DEBUG_NONE);
/*
* allocate memory, setup & open port
*/
if (argc < 2)
{
hamlib_port_t myport;
/* may be overridden by backend probe */
myport.type.rig = RIG_PORT_SERIAL;
myport.parm.serial.rate = 9600;
myport.parm.serial.data_bits = 8;
myport.parm.serial.stop_bits = 1;
myport.parm.serial.parity = RIG_PARITY_NONE;
myport.parm.serial.handshake = RIG_HANDSHAKE_NONE;
strncpy(myport.pathname, SERIAL_PORT, FILPATHLEN - 1);
rig_load_all_backends();
myrig_model = rig_probe(&myport);
}
else
{
myrig_model = atoi(argv[1]);
}
my_rig = rig_init(myrig_model);
if (!my_rig)
{
fprintf(stderr, "Unknown rig num: %d\n", myrig_model);
fprintf(stderr, "Please check riglist.h\n");
exit(1); /* whoops! something went wrong (mem alloc?) */
}
strncpy(my_rig->state.rigport.pathname, SERIAL_PORT, FILPATHLEN - 1);
retcode = rig_open(my_rig);
if (retcode != RIG_OK)
{
printf("rig_open: error = %s\n", rigerror(retcode));
exit(2);
}
printf("Port %s opened ok\n", SERIAL_PORT);
/*
* Below are examples of set/get routines.
* Must add checking of functionality map prior to command execution -- FS
*
*/
/*
* Example of setting rig paameters
* and some error checking on the return code.
*/
retcode = rig_set_vfo(my_rig, RIG_VFO_B);
if (retcode != RIG_OK)
{
printf("rig_set_vfo: error = %s \n", rigerror(retcode));
}
/*
* Lets try some frequencies and modes. Return code is not checked.
* Examples of checking return code are further down.
*
*/
/* 10m FM Narrow */
printf("\nSetting 10m FM Narrow...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 29620000); /* 10m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_FM,
rig_passband_narrow(my_rig, RIG_MODE_FM));
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.6f MHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000000,
rig_strrmode(rmode),
width / 1000.0);
sleep(1); /* so you can see it -- FS */
/* 15m USB */
printf("Setting 15m USB...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 21235175); /* 15m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_USB,
rig_passband_normal(my_rig, RIG_MODE_USB));
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.6f MHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000000, rig_strrmode(rmode), width / 1000.0);
sleep(1);
/* 40m LSB */
printf("Setting 40m LSB...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 7250100); /* 40m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_LSB,
RIG_PASSBAND_NORMAL);
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.6f MHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000000,
rig_strrmode(rmode),
width / 1000.0);
sleep(1);
/* 80m AM Narrow */
printf("Setting 80m AM Narrow...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 3885000); /* 80m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_AM,
rig_passband_narrow(my_rig, RIG_MODE_AM));
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.6f MHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000000,
rig_strrmode(rmode),
width / 1000.0);
sleep(1);
/* 160m CW Normal */
printf("Setting 160m CW...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 1875000); /* 160m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_CW,
RIG_PASSBAND_NORMAL);
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.3f kHz, Mode: %s, Passband: %li Hz\n\n",
freq / 1000,
rig_strrmode(rmode),
width);
sleep(1);
/* 160m CW Narrow -- The band is noisy tonight -- FS*/
printf("Setting 160m CW Narrow...\n");
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_CW,
rig_passband_narrow(my_rig, RIG_MODE_CW));
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.3f kHz, Mode: %s, Passband: %li Hz\n\n",
freq / 1000,
rig_strrmode(rmode),
width);
sleep(1);
/* AM Broadcast band */
printf("Setting Medium Wave AM...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 770000); /* KAAM */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_AM,
RIG_PASSBAND_NORMAL);
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.3f kHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000,
rig_strrmode(rmode),
width / 1000.0);
sleep(1);
/* 20m USB on VFO_A */
printf("Setting 20m on VFO A with two functions...\n");
retcode = rig_set_vfo(my_rig, RIG_VFO_A);
if (retcode != RIG_OK)
{
printf("rig_set_vfo: error = %s \n", rigerror(retcode));
}
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 14250375); /* cq de vk3fcs */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_vfo(my_rig, &vfo);
printf(" Freq: %.6f MHz, VFO: %s\n\n", freq / 1000000, rig_strvfo(vfo));
sleep(1);
/* 20m USB on VFO_A , with only 1 call */
printf("Setting 20m on VFO A with one function...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_A, 14295125); /* cq de vk3fcs */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_vfo(my_rig, &vfo);
printf(" Freq: %.6f MHz, VFO: %s\n\n", freq / 1000000, rig_strvfo(vfo));
sleep(1);
#if 0
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 145100000); /* 2m */
sleep(2);
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 435125000); /* 70cm */
sleep(2);
#endif
printf("Setting rig Mode to LSB.\n");
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_LSB,
RIG_PASSBAND_NORMAL);
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
sleep(1);
printf("Setting rig PTT ON.\n");
retcode = rig_set_ptt(my_rig, RIG_VFO_A, RIG_PTT_ON); /* stand back ! */
if (retcode != RIG_OK)
{
printf("rig_set_ptt: error = %s \n", rigerror(retcode));
}
sleep(1);
printf("Setting rig PTT OFF.\n");
retcode = rig_set_ptt(my_rig, RIG_VFO_A, RIG_PTT_OFF); /* phew ! */
if (retcode != RIG_OK)
{
printf("rig_set_ptt: error = %s \n", rigerror(retcode));
}
sleep(1);
/*
* Simple examples of getting rig information -- FS
*
*/
printf("\nGet various raw rig values:\n");
retcode = rig_get_vfo(my_rig, &vfo); /* try to get vfo info */
if (retcode == RIG_OK)
{
printf("rig_get_vfo: vfo = %i \n", vfo);
}
else
{
printf("rig_get_vfo: error = %s \n", rigerror(retcode));
}
retcode = rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
if (retcode == RIG_OK)
{
printf("rig_get_freq: freq = %"PRIfreq"\n", freq);
}
else
{
printf("rig_get_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
if (retcode == RIG_OK)
{
// cppcheck-suppress *
printf("rig_get_mode: mode = %"PRIll"\n", rmode);
}
else
{
printf("rig_get_mode: error = %s \n", rigerror(retcode));
}
retcode = rig_get_strength(my_rig, RIG_VFO_CURR, &strength);
if (retcode == RIG_OK)
{
printf("rig_get_strength: strength = %i \n", strength);
}
else
{
printf("rig_get_strength: error = %s \n", rigerror(retcode));
}
if (rig_has_set_func(my_rig, RIG_FUNC_RIT))
{
retcode = rig_set_func(my_rig, RIG_VFO_CURR, RIG_FUNC_RIT, 1);
if (retcode != RIG_OK) { printf("rig_set_func RIT error: %s\n", rigerror(retcode)); }
printf("rig_set_func: Setting RIT ON\n");
}
if (rig_has_get_func(my_rig, RIG_FUNC_RIT))
{
retcode = rig_get_func(my_rig, RIG_VFO_CURR, RIG_FUNC_RIT, &rit);
if (retcode != RIG_OK) { printf("rig_get_func RIT error: %s\n", rigerror(retcode)); }
printf("rig_get_func: RIT: %d\n", rit);
}
if (rig_has_set_func(my_rig, RIG_FUNC_XIT))
{
retcode = rig_set_func(my_rig, RIG_VFO_CURR, RIG_FUNC_XIT, 1);
if (retcode != RIG_OK) { printf("rig_set_func XIT error: %s\n", rigerror(retcode)); }
printf("rig_set_func: Setting XIT ON\n");
}
if (rig_has_get_func(my_rig, RIG_FUNC_XIT))
{
retcode = rig_get_func(my_rig, RIG_VFO_CURR, RIG_FUNC_XIT, &xit);
if (retcode != RIG_OK) { printf("rig_get_func XIT error: %s\n", rigerror(retcode)); }
printf("rig_get_func: XIT: %d\n", xit);
}
rig_close(my_rig); /* close port */
rig_cleanup(my_rig); /* if you care about memory */
printf("port %s closed ok \n", SERIAL_PORT);
return 0;
}
rig_strrmode
const char * rig_strrmode(rmode_t mode)
Convert enum RIG_MODE to alpha string.
Definition: misc.c:488
rig_strvfo
const char * rig_strvfo(vfo_t vfo)
Convert enum RIG_VFO_... to alpha string.
Definition: misc.c:609
rig_set_vfo
int rig_set_vfo(RIG *rig, vfo_t vfo)
set the current VFO
Definition: rig.c:2201
vfo_t
unsigned int vfo_t
VFO definition.
Definition: rig.h:395
rig_get_mode
int rig_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
get the mode of the target VFO
Definition: rig.c:1940
PRIfreq
#define PRIfreq
printf(3) format to be used for freq_t type
Definition: rig.h:340
rig_has_set_func
setting_t rig_has_set_func(RIG *rig, setting_t func)
check ability of radio functions
Definition: settings.c:444
rig_get_vfo
int rig_get_vfo(RIG *rig, vfo_t *vfo)
get the current VFO
Definition: rig.c:2302
RIG_VFO_A
#define RIG_VFO_A
VFOA – VFO A
Definition: rig.h:405
rmode_t
uint64_t rmode_t
Radio mode.
Definition: rig.h:1119
pbwidth_t
shortfreq_t pbwidth_t
Definition: rig.h:512
rig_cleanup
int rig_cleanup(RIG *rig)
release a rig handle and free associated memory
Definition: rig.c:1209
rig_get_freq
int rig_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
get the frequency of the target VFO
Definition: rig.c:1651
rig_set_func
int rig_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
activate/de-activate functions of radio
Definition: settings.c:475
rig_has_get_func
setting_t rig_has_get_func(RIG *rig, setting_t func)
check ability of radio functions
Definition: settings.c:414
rig_get_func
int rig_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
get the status of functions of the radio
Definition: settings.c:548
RIG_FUNC_XIT
#define RIG_FUNC_XIT
Definition: rig.h:1039
RIG_FUNC_RIT
#define RIG_FUNC_RIT
Definition: rig.h:1032
RIG_VFO_CURR
#define RIG_VFO_CURR
currVFO – current "tunable channel"/VFO
Definition: rig.h:441
rig_set_freq
int rig_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
set the frequency of the target VFO
Definition: rig.c:1499
rig_set_ptt
int rig_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
set PTT on/off
Definition: rig.c:2376
RIG_MODE_AM
#define RIG_MODE_AM
Definition: rig.h:1122
freq_t
double freq_t
Frequency type,.
Definition: rig.h:335
RIG_MODE_USB
#define RIG_MODE_USB
Definition: rig.h:1124
RIG_PASSBAND_NORMAL
#define RIG_PASSBAND_NORMAL
Macro for bandpass to be set to normal.
Definition: rig.h:501
rig_init
RIG * rig_init(rig_model_t rig_model)
allocate a new RIG handle
Definition: rig.c:354
rig_set_mode
int rig_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
set the mode of the target VFO
Definition: rig.c:1849
RIG_MODE_CW
#define RIG_MODE_CW
Definition: rig.h:1123
RIG_MODE_LSB
#define RIG_MODE_LSB
Definition: rig.h:1125
rig_close
int rig_close(RIG *rig)
close the communication to the rig
Definition: rig.c:1054
rig_passband_narrow
pbwidth_t rig_passband_narrow(RIG *rig, rmode_t mode)
get the narrow passband of a mode
Definition: rig.c:2096
RIG_MODE_FM
#define RIG_MODE_FM
Definition: rig.h:1127
rig_passband_normal
pbwidth_t rig_passband_normal(RIG *rig, rmode_t mode)
get the normal passband of a mode
Definition: rig.c:2051
rig_open
int rig_open(RIG *rig)
open the communication to the rig
Definition: rig.c:633
RIG_VFO_B
#define RIG_VFO_B
VFOB – VFO B
Definition: rig.h:408
rig_probe
rig_model_t rig_probe(hamlib_port_t *port)
try to guess a rig
Definition: rig.c:4798
RIG_PARITY_NONE
@ RIG_PARITY_NONE
Definition: rig.h:229
RIG_OK
@ RIG_OK
Definition: rig.h:122
RIG_PTT_OFF
@ RIG_PTT_OFF
Definition: rig.h:546
RIG_PTT_ON
@ RIG_PTT_ON
Definition: rig.h:547
RIG_PORT_SERIAL
@ RIG_PORT_SERIAL
Definition: rig.h:209
RIG_HANDSHAKE_NONE
@ RIG_HANDSHAKE_NONE
Definition: rig.h:241
RIG_DEBUG_NONE
@ RIG_DEBUG_NONE
Definition: rig.h:156
rig.h
Hamlib rig data structures.
rig_state::rigport
hamlib_port_t rigport
Definition: rig.h:2120
s_rig
The Rig structure.
Definition: rig.h:2260
s_rig::state
struct rig_state state
Definition: rig.h:2262
Generated by doxygen 1.9.1

Hamlib documentation for version 4.1
Project page: http://www.hamlib.org